eSIMRankings.com
Guide

eSIM missing or “No SIM” on iPhone after an update: what happened and how to fix it

eSIM missing or No SIM on your iPhone after an iOS update? What the message means, the fixes to try in order, what not to do and how to get a new eSIM.

Guides · 7 November 2026 · 8 min read

If your eSIM is missing on iPhone after an iOS update, or the status bar suddenly says No SIM, the eSIM is in most cases still on the phone. An update is not meant to delete eSIMs: on iPhone, removing one is always a separate, deliberate step. Usually the line is switched off, still reconnecting, or the plan behind it has run out. This guide shows how to read the message on your screen, which fixes to try in which order, what you should not do, and how to get a new eSIM if the old one is really gone.

Is your eSIM really gone after the update?

Probably not. On iPhone, an eSIM is a profile stored on a dedicated chip, the eUICC, and iOS only removes it when someone chooses to. The ways to do that are all explicit: Delete eSIM in the settings of a line, Delete All eSIMs in the Reset menu, and Erase All Content and Settings, where you choose whether to keep or erase the eSIM. A normal software update is none of these.

What changes after an update is usually the connection, not the profile. On the first start the phone has to register on a mobile network again, carrier settings may be refreshed, and a line that was switched off before stays off. If the update happened on the same day your travel plan expired, the two are easy to confuse.

Do not delete the eSIM to start fresh. Apple advises against erasing an eSIM as a troubleshooting step unless your carrier tells you to. Many travel eSIMs can be installed only once, so a deleted travel eSIM usually means asking the provider for a new one.

What the message on your iPhone means

Before you change anything, look at what the phone actually shows. Open Settings > Cellular (Mobile Service or Mobile Data in some countries), look at the list of SIMs and compare it with this table:

What you seeWhat it usually meansStart with
No SIM in the status bar, travel line still listed in SettingsThe eSIM is stored but not connectedRestart, then check that the line is turned on
Travel line listed but marked OffThe eSIM is stored and switched offTap the line and switch on Turn On This Line
Alert “Invalid SIM” or “No SIM Card installed”The phone cannot use the line right nowCheck the plan, the carrier lock and carrier settings
Alert “SIM Not Supported”The iPhone is locked to a carrierCarrier Lock under Settings > General > About
Signal or No Service, but no internetThe eSIM is there; the data connection failsLine for mobile data, data roaming, network selection
Travel line no longer listed at allThe profile is no longer on the phoneContact the provider (see below)

The first two rows can usually be fixed in a minute. The last row is the only one in which the eSIM is really gone.

Right after the update: give the phone a few minutes

The first start after an iOS update takes longer than a normal restart. The phone finishes setting itself up in the background, and its cellular part has to find and register on a network again. During this time the status bar can show Searching, No Service or No SIM, even though nothing is wrong with the eSIM.

Give it a few minutes with the phone unlocked. Abroad, the travel line may need a little longer, because it registers as a roaming device on a partner network. If you are still at home before your trip, the travel line may not connect at all: many travel plans only work in their destination. If the problem is still there after five to ten minutes, work through the fixes below.

Seven fixes to try, in this order

The order matters: the first steps are quick and change nothing permanently, the last one removes settings. After each step, test mobile data, for example by turning off Wi-Fi and opening a web page.

  1. Restart the iPhone. Turn it off completely, wait about 30 seconds and turn it on again. This is also the first step Apple lists for SIM alerts.
  2. Check that the line is turned on. In Settings > Cellular, tap the travel line. If Turn On This Line is off, switch it on. A line that is off is still stored; it simply does not connect.
  3. Choose the line for mobile data. In Settings > Cellular > Cellular Data, select the travel line. If you want all data to go through the travel eSIM, leave Allow Cellular Data Switching off.
  4. Switch on data roaming for the travel line. Abroad, most travel eSIMs connect as roaming customers on a partner network, so they need Data Roaming on: Settings > Cellular > your travel line > Data Roaming. Keep it off on your home SIM if your carrier charges for roaming.
  5. Toggle airplane mode. Turn it on for about 30 seconds, then off again. The phone then searches for networks from scratch.
  6. Look for a carrier settings update and a newer iOS version. Go to Settings > General > About and wait a few seconds: if a carrier settings update is available, a prompt with an Update button appears. Then check Settings > General > Software Update, because a follow-up release can fix problems introduced by the previous one.
  7. Reset network settings. Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This keeps your eSIMs, but it removes saved Wi-Fi networks, VPN settings you added yourself and manually trusted certificates, and it renames the phone to “iPhone”. Apple also notes that data roaming may be turned off, so switch it back on for the travel line afterwards.

Tap the right option in the Reset menu. Reset Network Settings and Delete All eSIMs are on the same screen. Delete All eSIMs removes every eSIM on the phone, including your home number if it is an eSIM. It is never the fix for a missing or disconnected line.

If you have signal but still no internet after all seven steps, the update is probably not the cause. Our guides eSIM not working abroad: 10 fixes and eSIM APN settings explained cover network selection, network mode and the APN.

Invalid SIM or SIM Not Supported: what the alerts point to

If the iPhone shows an alert instead of just No Service, the wording tells you where to look.

Invalid SIM or No SIM Card installed

Apple's checklist for this alert is short: make sure the plan is active, check the carrier lock, restart, look for a carrier settings update and, if the device uses an eSIM, contact the carrier. For a travel eSIM, the carrier is the provider you bought it from, not the local network shown on your screen. Apple names an inactive plan first, so check your plan before anything else (see the next section).

SIM Not Supported

This message usually means that the iPhone is locked to a carrier and refuses eSIMs from other companies. Go to Settings > General > About and look at Carrier Lock (called Network Provider Lock or Service Provider Lock in some regions). If it says No SIM restrictions, the phone is unlocked. If it does not, only the carrier that locked the phone can unlock it; Apple cannot do it for you. If your travel eSIM worked before the update and the phone now reports a lock, ask that carrier whether the unlock is still recorded on its side.

A locked iPhone cannot use a travel eSIM from another company at all, so it is worth checking this before you buy your next plan. Our guide Does my phone support eSIM? covers the carrier lock in more detail.

When the update is not the cause: an expired or used-up plan

Travel eSIMs come with a fixed amount of data and a fixed validity, often counted from the moment the plan first connects in the destination. When either runs out, the line stays in the list but stops working: no mobile data, sometimes No Service. If this happens on the same day as an update, the update tends to get the blame.

Check these three things before you contact support:

  • Remaining data and days. Providers usually show both in their app or in your account on their website.
  • The start date. Some plans start when you install them, others when you arrive. Our guide When to activate a travel eSIM explains the difference.
  • Top-up options. If the plan has run out, many providers let you add data to the same eSIM, so you do not need a new installation. Whether a provider allows topping up an existing eSIM is listed on each of our provider pages.

If data and days are left and the line is turned on, but nothing connects, the provider can check whether the eSIM is still active on its side.

If the eSIM is no longer listed: how to get it back

If the travel line has disappeared from Settings > Cellular, the profile is no longer on the phone. Around an update, this normally means one of these things happened:

  • The iPhone was erased or restored, for example after a failed update, and the eSIM was not kept.
  • The eSIM was deleted by hand, for example while trying to fix the problem.
  • The iPhone was repaired or replaced. A replacement device does not contain the eSIMs of the old one.

Restoring a backup does not bring a deleted eSIM back. Apple's advice is the same in every case: contact the company that issued the eSIM.

  1. Find your order details. The confirmation email contains the order number and often the ICCID of the eSIM. Your iPhone's EID and IMEI are under Settings > General > About.
  2. Contact the provider's support. Ask whether they can issue a new eSIM for the same plan and whether the remaining data and days carry over. Each provider handles this differently, so ask rather than assume.
  3. Do not rescan the old QR code again and again. If it was single-use, it will be rejected, and repeated attempts do not help support.
  4. For your home number, contact your home carrier. It can send a new eSIM for the same number, often after an identity check.
  5. If you need data right now, connect to Wi-Fi and install a new short plan, because installing an eSIM needs an internet connection. You can compare current plans for your destination in our eSIM comparison; the steps are in How to install an eSIM on iPhone.

What deleting an eSIM does to a plan is explained in How to delete an eSIM safely.

Before you update iOS on a trip

Most of these problems can be avoided with a little timing. If an iOS update is waiting, these habits keep your travel eSIM safe:

  • Update at home, before you leave. If something goes wrong, you have Wi-Fi, time and your home carrier within reach.
  • Control automatic updates. Under Settings > General > Software Update > Automatic Updates you can stop iOS updates from installing on their own during the trip and install them when it suits you.
  • Keep the order email and the provider's app. You need the order number, and sometimes the ICCID, if the eSIM ever has to be reissued.
  • Update on Wi-Fi with enough battery, and not shortly before a flight or a border crossing, when you need the connection most.
  • Avoid beta versions of iOS while travelling. Test versions can contain bugs that affect mobile connections.

If you are setting up a new phone before the trip rather than updating the old one, our guide How to transfer an eSIM to a new phone explains what happens to travel eSIMs.

Questions travellers ask

Does an iOS update delete my eSIM?+

Not by design. On iPhone, an eSIM is only removed by a deliberate action: Delete eSIM, Delete All eSIMs, or erasing the phone with the eSIM option set to erase. After an update the eSIM is usually still listed under Settings > Cellular, even if it shows No SIM or No Service for a while.

Why does my iPhone say No SIM after an update when I use an eSIM?+

Usually the line is still stored but not connected: it is switched off, still registering on the network, or the plan behind it has expired. Restart the iPhone, check that Turn On This Line is on for the eSIM, then look for a carrier settings update under Settings > General > About.

Does Reset Network Settings delete my eSIM?+

No. Reset Network Settings removes saved Wi-Fi networks, VPN settings you added yourself and manually trusted certificates, and it can turn off data roaming. Deleting eSIMs is a separate option called Delete All eSIMs on the same screen, so make sure you tap the right one.

Can I reinstall my travel eSIM with the same QR code?+

Often not. Many travel eSIMs can be installed only once, and a used code is then rejected. If the eSIM was deleted, contact the provider and ask for a new eSIM for the same plan instead of scanning the old code again.

Will restoring my iPhone from a backup bring the eSIM back?+

No. A backup restores your data and settings, but not a deleted eSIM. Apple's advice is to contact the company that issued the eSIM, which can send you a new one for the same plan or number.

Should I update iOS while I am abroad?+

If you can, update before the trip. If an update is waiting while you travel, install it on Wi-Fi with enough battery and not right before you need the connection. You can stop updates from installing automatically under Settings > General > Software Update > Automatic Updates.

Can an eSIM disappear after an Android update too?+

An Android update can also leave a line switched off or without a connection. The checks are similar: restart, make sure the SIM is turned on in the SIM settings, choose it for mobile data and turn on roaming for the travel SIM. Our Android installation guide shows where these settings are.

Written by the eSIM Rankings editorial team. The menu names and reset options described are those in current iOS versions as of November 2026, based on Apple's published support documentation; names can differ by model, region and iOS version. We compare published information and do not test providers ourselves. If an eSIM has to be reissued, your provider's own instructions apply.

← All guides